TEDAN Ceramic Pro INOX 80, 2.1 kW

• Keeps the water clean;
• Longer heating element life;
• Less limescale build-up;
• Heating element replacement without draining the water heater;
• Easy installation and maintenance;

TEDAN Ceramic inox is a stainless steel electric water heater with a multi-level safety system and reliable protection against limescale formation, a suitable solution for all areas with hard water where a long-term solution for constant comfort is needed.

Comfort
Everyday comfort with the 80-litre TEDAN Ceramic inox water heater, which keeps the water clean for your daily needs. A volume of 80 litres is fully sufficient for a family of two.

Tedan Ceramic inox keeps the water clean. Stainless steel tanks retain far fewer harmful deposits on their walls than other types of water heaters, which makes the environment in the tank less prone to bacterial growth.

The external thermostat makes it easy to set the desired temperature, and the indicator light shows the operation of the appliance.

With its dry ceramic heating element, TEDAN Ceramic contributes further to savings thanks to its ability to retain and hold heat for longer. About the benefits of the dry ceramic heating element.

Design
The classic white colour and soft shape are characteristic of the TEDAN Ceramic model.
The appliance is controlled by an electromechanical regulator with which you can easily set the temperature and amount of heated water. The water heater's thermometer helps you monitor when it is ready to deliver hot water.

The stainless material of the tank makes it resistant when working with any type of water (soft/hard). This significantly extends the life of the appliance. Stainless steel is neutral in contact with water and does not change its composition.

The dry ceramic heating element counteracts limescale build-up, because the heating is spread over a much larger area than with other dry heating elements, thus keeping a much lower surface load. The ceramic base of the heating element holds and retains heat longer, which also results in higher energy efficiency.

Don't be left without hot water, even if the heating element fails. TEDAN Ceramic is designed so that you can replace the heating element without draining the water heater.

Safety
Safety is our main priority. Each of our water heaters comes with a non-return/relief valve that provides additional protection for the appliance.
TEDAN Ceramic Inox 80 brings extra peace of mind with a 12-year warranty, during which you can rely on our service network throughout the country.

Installation and maintenance
To get the best out of your appliance, make sure it is installed by a qualified person. Try to carry out regular maintenance.

Thanks to the dry heating element, if the heating element needs to be replaced, the water heater does not have to be drained.


Features:

• Dry ceramic heating element with low surface load, suitable for areas with aggressive and/or hard water, where limescale build-up is high.
• The ceramic heating element is located in a stainless steel sleeve / tube and has no direct contact with the water
• Vertical installation
• Tank made of high-quality carbon steel EN1.4401 with a thickness of 1.2 mm to 1.8 mm, tested at 12 Bar pressure.
• The stainless steel we use in Tedan water heaters comes from proven manufacturers and is of the highest quality.
• Thermal insulation of CFC-free polyurethane foam with a thickness of 25 to 49 mm (made by Bayer - Germany).
• Thermostat with frost protection (made by Thermowatt – Italy)
• Square flange for higher reliability and safety of the appliance.
• Water heater protection class IP: X4.
• Pipe diameter (plumbing) 1/2”.