Home 
About Us 
Contact Us 
Credit 
Payment methods 
Delivery 
Radiators
Underfloor heating
Boilers
Fireplaces & Stoves
Solar systems
Water heaters & Buffer vessels
Air conditioners
Heat-pumps
Pipes & Fittings
Pumps
Controls
Redundant power supply
Expansion tanks
Chimney elements
- Tank made of high-quality alloyed stainless steel EN1.4401 with a thickness of 1.2 mm to 1.8 mm, tested at 12 Bar pressure.
- The stainless steel we use in Tedan water heaters comes from proven manufacturers and is of the highest quality.
- Thermal insulation of CFC-free polyurethane foam with a thickness of 25 to 49 mm (made by Bayer - Germany).
- Thermostat with frost protection (made by Thermowatt – Italy)
- Maximum operating temperature up to 72°C.
- Magnesium anode with up to 50% longer life, removable and replaceable.
- Elliptical flange for higher reliability and safety of the appliance.
- Water heater protection class IP: X4.
- Pipe diameter (plumbing) 1/2".
installation | vertical | |
volume | L | 80 |
tank material | stainless steel / inox | |
heating element type | nickel-plated | |
heating element power | W | 3000 |
number of mounting plates | 2 | |
operating voltage | V | ~ 220 - 230 |
power supply | single-phase | |
thermostat | yes | |
maximum operating pressure | bar | 6 |
insulation type | CFC-free polyurethane foam | |
insulation thickness | mm | 25 - 49 |
number of thermostats | 2 | |
pressure regulator | yes | |
operation indicator | yes | |
anode tester | no | |
protection | magnesium anode | |
IP | X4 | |
frost protection | yes | |
safety valve | yes, in the appliance packaging | |
width | cm | 82.5 |
diameter | cm | 45.4 |
weight (with packaging) | kg | 20.5 |
-
Manufacturer:Tedan
-
Warranty:10 years
