TEDAN Bufer ATC 80l.

The TEDAN Bufer ATC 80 buffer tank is an enamelled steel vessel with a volume of 80 litres, connected into the heating installation. The manufacturer recommends it as an addition to all types of heat pump systems – the buffer ensures their optimal operation when operating modes change.

How it works:

The buffer stores thermal energy from the heating installation. When this energy is used for heating, low-temperature heating is supplied from the lower layers of the buffer and high-temperature heating from the upper, warmer layers.

Construction:

• Water container made of DC04EK steel with a thickness of 1.8 to 2.2 mm, tested at 12 bar pressure
• Internal enamel coating with high quartz content – high corrosion resistance
• CFC-free polyurethane thermal insulation that retains heat for a long time
• Built-in replaceable magnesium anode at the top
• Inlet for an additional thermostat on the right side
• Connections convenient for installation and maintenance

Technical specifications:

• Model: ATC-80
• Volume: 80 l
• Maximum operating pressure: 0.6 MPa (6 bar)
• Side connections: 5/4"
• Overall dimensions (H × W × D): 834 × 420 × 436 mm
• Installation: vertical
• Warranty: 3 years

The buffer is part of the heating installation, which must be designed by a licensed designer. Installation and commissioning must be carried out only by a qualified specialist or authorised service centre. The installation must be protected by a safety valve with an opening pressure of up to 0.6 MPa. The manufacturer recommends preventive cleaning every two years.