BOSCH AWM 13-17 + Compress 6000 AW-13t Set BG, 13 kW

Supplied with a hydro module with a built-in 190 l water heater.

The Bosch Compress 6000 AW-13t + AWM 13-17 set is a monobloc air-to-water heat pump for heating, cooling and domestic hot water. The Compress 6000 AW-13t outdoor unit is three-phase, with a rated heat output of 10.7 kW at A-7/W35 (up to 11.7 kW at A+2/W35), and the AWM 13-17 indoor hydro module has a built-in 190-litre stainless steel water heater.

The refrigerant circuit is entirely in the outdoor unit, so only water pipes run between the two units. The hydro module has a built-in electric heater that switches on in steps when needed, so the heat pump can be the only heat source in the house. It is suitable both for new buildings and for replacing an old heating system.

Advantages:

• High seasonal efficiency: SCOP 4.54 at 35 °C and 3.58 at 55 °C (ηs 179 % / 140 %).
• Flow temperature up to 62 °C from the heat pump alone.
• Inverter compressor with soft start (starting current below 5 A).
• Silent mode that reduces noise by up to 3 dB(A).
• Active cooling when the system has underfloor heating or convectors.
• Built-in 190-litre stainless steel water heater and expansion vessel in the hydro module.
• Internet connection option.

Technical specifications:

• Outdoor unit: Bosch Compress 6000 AW-13t (three-phase)
• Heat output at A-7/W35: 10.73 kW, COP 2.74 (modulation 4.0–10.7 kW)
• Heat output at A+2/W35 (100 %): 11.71 kW
• Heat output at A-10/W35 (100 %): 9.97 kW
• Partial load: A+7/W35 5.18 kW, COP 5.00; A+2/W35 7.00 kW, COP 3.64
• Cooling capacity: 8.86 kW at A35/W7 (EER 2.72), 11.12 kW at A35/W18 (EER 3.23)
• SCOP: 4.54 at 35 °C, 3.58 at 55 °C
• Maximum flow temperature (heat pump only): 62 °C
• Outdoor unit power supply: 400 V 3N AC / 50 Hz, fuse 13 A, maximum power input 7.2 kW
• Outdoor unit sound power: 53 dB(A) (64 dB(A) max., 57 dB(A) in silent mode)
• Refrigerant: R410A, 3.3 kg (GWP 2088, 6.89 t CO₂ eq.)
• Outdoor unit dimensions (W x H x D): 1122 x 1695 x 545 mm, weight 182 kg
• Hydro module: Bosch AWM 13-17, 190 l water heater of stainless steel 1.4521
• Electric heater in the hydro module: in steps of 3 / 6 / 9 / 12 / 15 kW
• Hydro module power supply: 400 V 3N AC / 50 Hz, recommended fuse 25 A
• Expansion vessel in the hydro module: 14 l
• Operating pressure in the heating circuit: from 50 to 250 kPa; maximum pressure in the DHW circuit: 1 MPa
• Hydro module dimensions (W x D x H): 600 x 645 x 1800 mm

What the kit includes:

• Bosch Compress 6000 AW-13t outdoor unit (three-phase)
• Bosch AWM 13-17 indoor hydro module with a built-in 190-litre water heater

If the system has mixed heating circuits, the manufacturer requires a buffer tank of at least 100 l. Installation and commissioning must be carried out by an authorised service centre.