Home 
About Us 
Contact Us 
Credit 
Payment methods 
Delivery 
Radiators
Underfloor heating
Boilers
Fireplaces & Stoves
Solar systems
Water heaters & Buffer vessels
Air conditioners
Heat-pumps
Pipes & Fittings
Pumps
Controls
Redundant power supply
Expansion tanks
Chimney elements
Grundfos UPA15-90 160 1x230V
Price:
145.00 € с ДДС
- Grundfos UPA booster pumps increase the pressure of domestic water in the water supply system when needed for bathrooms, kitchens, showers, taps, etc. All UPA pumps are supplied with a cable. The pumps have a built-in flow switch (pressure switch) that starts or stops the pump automatically depending on whether water is being drawn at the moment. The pressure switch is integrated in the pump
- UPA booster pumps are designed to boost the pressure of domestic water supplied from an external source in residential buildings. UPA booster pumps can also be used in open systems and can be connected directly to the water mains
- The pump can be installed in new and existing systems and has a low noise level during operation. The pump has high energy efficiency thanks to the high-efficiency technologies used. Corrosion resistance: the pump has a special cataphoretic coating
- UPA booster pumps are suitable for the following liquids: fresh water, drinking water without chemical additives, chlorinated drinking water. UPA booster pumps are not suitable for transferring flammable liquids such as diesel fuel and petrol
- UPA pressure-boosting circulation pumps have a wet-rotor design, i.e. the pump and motor form an integral unit without a shaft seal. The bearings are lubricated by the pumped liquid
- Maximum system pressure: 10 bar. Pressure class: PN10
- To avoid cavitation noise and the risk of damage to the pump bearings, a minimum pressure of 2.0 m / 0.2 bar is required during operation
- The UPA 15-90 pump has a 2-pole asynchronous squirrel-cage motor. The motor is impedance protected, protected against short circuit and requires no external electrical protection
- The impeller is a radial impeller with curved composite blades. It is fixed to the shaft by a split cone
- The UPA pump must always be installed with the motor shaft horizontal. The UPA 15-90 is installed vertically. The terminal box must be at the pump outlet
- Materials: housing: cast iron BDS EN 1561 EN-GJL-150, ASTM 30 B; rotor can: stainless steel EN 1.4301, AISI 304; composite impeller PSP/PP 30 % GF
- Liquid temperature in the pump: +2 °C to +95 °C
- Ambient air temperature around the pump: +2 °C to +40 °C
- Enclosure class: IPX2D, insulation class: H
- Pipe connections: Rp 3/4 with union connections 1/2"
- Noise level: < 43 dB(A)
- Power supply: 1 x 230 V, 50 Hz
- Flow rate: max. 1.7 m3/h
- Pressure (head): max. 0.9 bar (9 m)
- Power consumption: 120 W
- Supplied with a Schuko plug
- UPA pump operating modes: I OFF The pump is switched off. II AUTO The pump starts and stops automatically (when the flow rate rises above or falls below 90-120 l / h). III MANUAL The pump runs continuously. When the selector is in the "MANUAL" position, at least one tap must be open. Otherwise the pumped liquid may become too hot
- Net weight: 2.5 kg
- Manufacturer: Grundfos
- Country of origin: China
- CE marking
- Warranty 24 months
-
Manufacturer:Grundfos
-
Power:40 ÷ 118 W
-
Voltage:1 x 220-240 V, 50 V
-
Work flow:1.7 m³/h
-
operating head:9 m
-
Mounting:mm
-
Diapason:2 ÷ 70 °С
| File | Info |
|---|---|
UPA_instrukciq
|
[PDF, 3.87 MB] |
