Drainage submersible pump with float switch Grundfos Unilift CC9-A1

• Grundfos Unilift series - high-quality drainage pumps for submerged installation
• Grundfos Unilift series pumps are single-stage submersible pumps for pumping slightly contaminated water. The pump can operate in both automatic and manual mode and is suitable for stationary and mobile use.
• Applications: Pumping waste water from dishwashers, showers and baths from drainage points in buildings to the local sewer; pumping water out of flooded basements; pumping rainwater from collection pits; emptying swimming pools and tanks.
• GRUNDFOS UNILIFT series pumps are supplied with a factory-fitted float switch for low-level monitoring, a non-return valve, 10 metres of power cable and a plug
• Maximum diameter of particles in the water (sphere): Ø10 mm
• Operating flow rate: 0.2 ÷ 14.0 m³/h
• Operating head: 1 ÷ 9 m
• Maximum head: 9.5 m
• Motor electrical power: 780 W
• Materials: pump body - PP 15 GF, impeller - PPOm 20 GF, shaft and suction strainer - stainless steel
• Liquid temperature from 0 °C to 40 °C (up to 70 °C for up to 2 minutes)
• Handles contaminated liquids
• Submersion depth below the water level: max. 10 m
• Minimum drain-down level from the bottom with float operation: 90 mm
• Minimum drain-down level from the bottom in manual operation (with the suction strainer removed): 3 mm
• Pump outlet connection size: 3/4" - 1" - 1 1/4" (universal)
• Enclosure class (IEC 34-5): IP 68 cl. F
• Overall dimensions (DxH) in mm (without the float, with the handle): Ø160 mm, H= 342 mm
• Minimum pit dimensions (AxBxH): 50 x 50 x 57 cm
• Power cable: 10 metres of H05RN-F 3G0.75 cable
• Plug: Schuko
• Float switch for automatic operation
• Non-return valve
• Motor protection with automatic reset
• Noise level: below 70 dB
• Power supply: 1 × 220÷240 V -10%/+6%, 50 Hz
• Net weight: 6.5 kg
• Manufacturer: GRUNDFOS
• Warranty 24 months

Unilift CC performance curves: