Heat-pump Mitsubishi Electric ERSC-VM2D/PUHZ-SW75VAA, 8 kW

Heat pump for heating and cooling without built-in water heater

Power Inverter heat pump with guaranteed efficiency at an outdoor temperature of -15°C. Ecodan air-to-water heat pumps from Mitsubishi Electric offer you various solutions for heating/cooling or for producing domestic hot water. The Power Inverter outdoor units guarantee an operating range down to -20°C and are equipped with a circulation pump and an additional electric heater. The refrigerant circuit of the Power Inverter technology consists of an integrated compressor whose frequency adjusts to the requirements of the indoor unit.

The heat pump system consists of the following components:

• outdoor unit

• indoor unit Hydrobox

• control module.

Technical specifications

Heating capacity A7/W35 - 8.00kW
Heating energy efficiency COP - 4.40
Heating power input A7/W35 - 1.82kW
Heating capacity A-15/W35 - 5.20kW
Heating energy efficiency COP - 2.88
Heating power input A-15/W35 - 1.81kW
Cooling capacity A35/W7 - 7.10kW
Cooling energy efficiency EER - 2.70
Cooling power input A35/W7 - 2.63kW
Cooling capacity A35/W18 - 7.10kW
Cooling energy efficiency EER - 4.43
Cooling power input A35/W18 - 1.60kW
Power supply V/phase/Hz - 230V/1N/50Hz
Noise level Heating / Cooling dB(A) - 43/45
Dimensions (H x W x D) - 1020 x 1050 x 480 mm
Refrigerant R410a
Weight - 92.00 kg.

Technical specifications of the indoor unit

Built-in electric heater with a power of - 2.0kW
Built-in stainless steel water tank with a volume of - none
Power supply (V/phase/Hz) - 230V/1N/50Hz
Built-in expansion vessel with a volume of - 10 litres
Operating outdoor temperature 0 ~ +35°C
Desired outdoor temperature range
Heating room temperature 10~ 30°C;
Heating water temperature 25~ 60°C;
Cooling water temperature 5~ 25°C;
Domestic hot water - no
Noise level - 28 dB (A)
Condensate tray - yes
Dimensions (H x W x D) - 800 x 530 x 360 mm
Weight - 49.00kg

Advantages of the indoor unit :

• Advanced control system that allows up to 8 wireless controllers to be connected.

• Automatically adjusts the water temperature in the system according to changes in the outdoor temperature.

• Supports control of two temperature zones, which makes it possible to set two different temperature values.

• Can be connected to an existing energy source (control system for a second energy source).

• Option for software updates, data logging and user settings.

• Wireless WiFi adapter ( OPTION ) – MELCloud, which allows quick and easy remote operation and control of the unit.

• Allows the use of all three modes from one split heat pump system - heating, cooling and domestic hot water. Application for large houses, offices, industrial buildings and hotels. It is also suitable for hot water production only.

• The ERSC-VM2D hydro module can be combined with domestic hot water tanks of 200 l.