Thermopump water heater with single coil Sunsystem 200l. TDA-S, enameled

The hot water heat pump works by extracting heat from the air in the room where it is installed, then intensifying it in the condenser unit and transferring it to the water in the tank. It can be installed in a non-residential room only if a supply of fresh air is provided

ADVANTAGES:

• High-efficiency insulation (DIN 4753-8): rigid PU, 50 mm thick.
• Rigid PVC casing
• Made of S235JR low-carbon steel.
• Comprehensive corrosion protection: titanium enamel inner coating (DIN 4753-3) and a fitted magnesium
  anode (DIN 4753-6).
• Convenient inspection opening.
• Working pressure: 10 bar
• Test pressure: 15 bar
• Maximum temperature: 60°C
• All connections have internal threads.
• Safety valve, 8 bar.
• Adjustable rubber feet on all models.

TECHNICAL SPECIFICATIONS

MODEL	TDA E200 / TDA S200	TDA E300 / TDA S300
Capacity :
Energy efficiency class	A+	A+
Heating output	1850 W (3850W)*	1850 W (3850 W)*
COP (EN 16147, EU 812/2013)	3.4 – L	3.4 – XL
Amount of hot water (EN 16147)	275 L	387.7 L
Version:
Heat source	Air	Air
Controller	4R OPTITRONIC	4R OPTITRONIC
Installation	Indoor	Indoor
Power control	ON/OFF	ON/OFF
Defrosting	HotGas Bypas	HotGas Bypas
Electric heater	2x1000 W	2x1000 W
Operating range:
Air temperature: min – max	5°C to 35°C	5°C to 35°C
Water temperature: min. inlet – max. outlet	10°C – 60°C	10°C – 60°C
Refrigerant circuit:
Refrigerant	R134a	R134a
Refrigerant quantity	1.3 kg	1.3 kg
Heat source :
Required air flow	400 m3/h – 500 m3/h	400 m3/h – 500 m3/h
Max. air pressure drop	50 Pa	50 Pa
External static air pressure	~ 90 Pa	~ 90 Pa
Water tank volume	200 L	300 L
Sanitary connections (cold / hot water)	1”	1”
Sanitary connections for water circulation	3/4”	3/4”
External heat sources	1”	1”
Electrical data:
Power supply / protection	230 V; 50 Hz / 16 A	230 V; 50 Hz / 16 A
Electrical power	440 W (2440 W)*	440 W (2440 W)*
Noise level:
Sound power with air ducts	<61 dB(A)*